Tag Archives: Training

Cisco CCNP Training Course – Day 8 – SWITCH

So day 8 essentially was the last day of the bootcamp, with Day 9 + 10 being left for TSHOOT, of which there is very little documented, as its……. troubleshooting a broken system.

So Day 8, let’s get to it.

Here’s whats covered;

  • HSRP Continued…..
    • comparison between HSRP and VRRP
    • GLBP – Gateway Load Balancing Protocol
  • Port-Security
  • Private VLANs
  • AAA – Authentication, Authorization, Accounting
  • VLAN Access-List
  • DHCP Snooping
  • ARP Poisoning / Man in the Middle
  • IP Spoofing
  • Other security considerations
  • Logging
  • MLS-Mutli-Layer Switching
    • Process Switching
    • Fast Switching
    • CEF
  • Voice – IP Telephony
  • QoS – Quality of Service
    • Layer 2 – Class of Service
    • Layer 3 – IP Precedence (Old setting)
    • Layer 3 – DSCP – Sub Marking (New setting)
    • Configuration of QoS
  • And that’s all folks

Continue reading Cisco CCNP Training Course – Day 8 – SWITCH

Veeam VMCE Course & Exam Experience

So I passed my VMCE exam the other week.

Basically I sat the course and the exam due to working for a Veeam Gold partner, which requires that the partner has one certified person to keep the status.

vmce_logo

The Course

Overall with the use of Veeam Certified Engineer title, Im not convinced it lives up to using the Engineer name, I think Administrator should be better? The course material seems to be a bit of a rehash of the administrators guide for the software, plus the PDFs on deployment methods. The troubleshooting section is a bit lack lustre, its basically how to use the Veeam console to export the logs to send to Veeam. No information on how to find and use the logs yourself. Continue reading Veeam VMCE Course & Exam Experience

Cisco CCNP Training Course – Day 6 – SWITCH

Ok so my Switch exam is booked, so time to get back on top of blogging my bootcamp notes, which is going to be a bit hard now I’ve left it a few weeks.

So, to start, wiping a switches existing config

erase startup config
delete flash:vlan.dat 

VLANs Continue reading Cisco CCNP Training Course – Day 6 – SWITCH

Cisco CCNP Training Course – Day 5 – ROUTE

Forgive me for taking a few days off from blogging about my training course.

As you’ll guess I’ve done the 2 week course. It was very good, The Knowledge Academy provided a fantastic trainer in Darron Smith.

So onto my Day 5, its the big one in Route!! BGP!!!

Heres what we will cover;

  • BGP
  • BGP designs
  • BGP quick facts
  • BGP Connection Redundancy
  • BGP Topologies
  • BGP Packets
  • BGP Process
  • BGP Tables
  • BGP Path Selection

So lets dive in!!!!

Continue reading Cisco CCNP Training Course – Day 5 – ROUTE

Cisco CCNP Training Course – Day 4 – ROUTE

Day 4 – Kind of, the course has mostly followed each of my post, however I have kind of mixed and match a few things so they flow better.

Also i’ve found out how to truncate my posts on the homepage, so it says, click here to read more, or something to that effect!

As you can imagine, something’s whilst labbing a few things, it can all get muddled.

Just one more quick note, I bought the revision materials from here https://www.ccnpguide.com

I’ve not had a change to look through them properly, but they are well set out and look like a fantastic quick revision guide with all the commands and tidbits of info you need for the exam.

So the topics that will be covered in this one are;

  • OSPF Summerization
  • OSPF Default Route
  • LSA/LSU Types
  • Special Areas (Stubby and Not-So-Stubby-Area)
  • OSPF Redistribution
  • Routing Protocol – Route Filtering
  • ACLs for route filtering
  • Route-Map for route filtering
  • Prefix-List for route filtering
  • Policy-Based Routing
  • IPv6
  • IPv6 with OSPFv3
  • IPv6 OSPFv3 Virtual-Link

Continue reading Cisco CCNP Training Course – Day 4 – ROUTE