Tag Archives: Secondary Flash Array

Veeam Nimble Storage Integration Banner

First Look – Leveraging the Nimble Secondary Flash Array with Veeam – Setup guide

Storage, Veeam, , , , , ,

Following on with the setup guide of the Nimble Secondary Flash Array, I am going to go through the deployment options, and the settings needed for implementation with Veeam Backup and Replication.

What will be covered in this blog post?

  • Quick overview of the SFA
  • Deployment Options
    • Utilizing features of Veeam with the SFA
    • Using a backup repository LUN
  • Best practices to use as backup repository
    • Veeam Proxy – Direct SAN Access
    • Creating your LUN on the SFA for use as a backup repository
    • Setting up your backup repository in Veeam
    • vPower NFS Service on the mount server
    • Backup Job settings
    • SureBackup / SureReplica
    • Backup Job – Nimble Storage Primary Snapshot – Configure Secondary destinations for this job
    • Encryption – Don’t do it in Veeam!
  • Viewing data reduction savings on the Nimble Secondary Storage
  • Summary

My test lab looks similar to the below diagram provided by Veeam (Benefits of using Nimble SFA with Veeam).

Nimble Storage Veeam Architecture diagram

Quick overview of the SFA

The SFA is essentially the same as the previous Nimble Storage devices before it, the same hardware and software. But with one key difference, the software has been optimized against data reduction and space-saving efficiencies, rather than for performance. Which means you would purchase the Nimble CS/AF range for production workloads, with high IOP performance and low latency. And the SFA would be used for your DR environment, backup solution, providing the same low latency to allow for high-speed recovery, and long-term archival of data.

Deployment options

With the deployment of an SFA, you are looking at roughly the same deployment options as the CS/AF array for use with Veeam (This blog, Veeam Blog). However with the high dedupe expectancy, you are able to store a hell of a lot more data!

So the options are as follows;

  1. iSCSI or FC LUN to your server as a Veeam Backup Repo.
    • Instant VM Recovery
    • Backup Repository
    • SureBackup / SureReplica
    • Virtual Labs
  2. Replication Target for an existing Nimble.
    • Utilizing Veeam Storage Integration
      • Backup VMs from Secondary Storage Snapshot
      • Control Nimble Storage Snapshot schedules and replication of volumes

If we take option one, we open up a few options directly with Veeam. You can use the high IOPs performance and low latency, for features such as Instant VM recovery, where by the Veeam Backup and Replication server hosts an NFS datastore to your virtual environment and spins up a running copy of your recovered virtual machine quickly with little fuss.

Veeam Instant VM Recovery Continue reading First Look – Leveraging the Nimble Secondary Flash Array with Veeam – Setup guide →

Nimble Secondary Flash Array Banner

Setting up a Nimble Secondary Flash Array from scratch

Storage, , , , , ,

Nimble Storage have released their newest addition in the line up, the SFA, or to give its full name, the Secondary Flash Array. And in this post, we are going to look at how to set one up from scratch.

Taken from the following datasheet;

The Nimble Secondary Flash Array represents a new type of secondary data storage optimized for both capacity and performance. It adds high-performance flash storage to a capacity-optimized architecture for a unique backup platform that lets you put your backup data to work.

The Nimble Secondary Flash Array is optimized for backup, disaster recovery and secondary data storage. By using Flash, it lets you put your backup data to work for Dev/Test, QA and analytics. Instantly backup and recover data from any primary storage system. And our integration with Veeam backup software simplifies data lifecycle management and provides a path to cloud archiving.
Before you get started

As you can imagine it’s as easy as setting up one of the existing Nimble Arrays, as I blogged about previous (Setup via GUI, via CLI). Actually the configuration via CLI is the exact same!

First things to note; the SFA ships with the NimOS 4.x, which is now HTML5 based, and there is extra port requirement for access if you have a firewall or a web proxy in the situ, TCP 5392, which is used for RESTapi access. In my testing, I found that the Sophos web filter that was setup in transparent mode, caused issues with my login page on the Nimble, when I removed it from the equation, I noticed my Firefox gave me a pop-up window as per the below.

Nimble SFA port 5392 e1498081602430

How to setup the array – initial configuration
  • Launch the Nimble Setup Manager, this can be downloaded from https://infosight.nimblestorage.com

You’ll see below I actually used an older version, and it still worked fine discovering the array. When you click next, you’ll be presented a dialog box explaining that your default browser will be launched to continue the setup (as part of the new HTML5 interface).

Nimble Setup Manager connect to SFA Nimble Setup Manager Launch web browser to connect to SFA

 

  • Accept the certificate error, as the Nimble uses a self signed cert on the web interface

Continue reading Setting up a Nimble Secondary Flash Array from scratch →